PROPER MAINTENANCE OF THE COMPUTER SYSTEM AND OTHER RELATED GADGETS
Much as the
name implies, preventive maintenance, often abbreviated PM, refers to
performing proactive maintenance in order to prevent system problems, because
the faults developed by personal computers starts from poor maintenance. PM is
the direct opposite of diagnostic or corrective maintenance, which is performed
to correct an already existing problem.
There’s a common saying that says “prevention is better than
cure”: most times the amount you spend to prevent a problem from happening is
always cheap compared to the amount used for repairs.
For instance,
anyone who has ever owned/cared for a car is supposed to know all about
preventive maintenance; if you do change your oil and air filter as at when due
your engine will last and you won’t have car troubles down the road.
GENERAL CLEANING
Cleaning your personal and office computer components and
peripherals helps to keep our gadgets in good shape all the time.
The rate at which you clean your computers depends on the
environment your computer operates in.
CLEANING TOOLS
There are thousands of computer cleanings tools that have
been produced by many companies. In
order to avoid spending so much on cleaning in case you don’t have much, here
are some household items that can be used to clean your computer system.
·
CLOTH: A cloth is the best tool
when rubbing down a component; although paper towels can be used with most
hardwares but rhidtech
recommends a cloth whenever possible.
·
PORTABLE VACUUM: A portable vacuum is recommended for sucking dusks, dirt, hair and any
other particle. This is one of the best tools used in cleaning computers. {do
not use a standard vacuum}
·
WATER: When
moistening a cloth, it is best to use water. As other solvents may damage the
plastic used for your computer. { you can use robbing alcohol if you can’t find
water.
GENERAL CLEANING TIPS
General tips that should be taken when cleaning any of the components
or peripherals of a computer are listed below;
- Do not spray
any liquid onto your computer component. If you ever need to spray, spray onto
a cloth then use the cloth to rub the intended area.
- Use
a vacuum specified for computers to suck up dirt, dust, or hair around the case
of your computer. { vacuum is for external use only}.
- Do not switch
your computer on while cleaning a component.
- Do not use
highly concentrated solvents as some solvents can damage cases and some people are also allergic to certain solvents.
{use water or a highly diluted solvent}.
- Be cautious when cleaning so as not to any
knobs or control.
- When cleaning the back of your computer, if
anything is plugged in make sure you don’t disconnect.
- When cleaning sharp components ie fan; the
fan should be held to prevent spinning. {do not clean
fan with a vacuum as it may cause damage or generation of back voltage.
- Do not eat
or drink around your computer.
The main and primary aim behind computer
maintenance Is to help your computer/gadgets last longer.
WATCHOUT FOR OUR
NEXT ARTICLE ON CLEANING PROCEDURES.
I am happy to find this post Very useful for me, as it contains lot of information
ReplyDeleteArticle submission sites
Education
Its a wonderful post and very helpful, thanks for all this information. You are including better information regarding this topic in an effective way. Thank you so much.
ReplyDeleteDigital Marketing Course in Chennai
Digital Marketing Training in Chennai
Angularjs Training in Chennai
AWS Training in Chennai
Big Data Analytics Courses in Chennai
Blue Prism Training in Chennai
Digital Marketing Training in Adyar